Intro to Circuits P.2 (Update)

This is part 2 of the intro to circuits. Here we will discuss about what lights resistance and point charges

In this pictures we show how we can manipulate a circuit to make a light dimmer or brighter with only a switch of a battery placement or wire placement.

Here is a calculation of the difference in temperature when power is pushed through wires to warm a cup of liquid that is water.

Here is a graph of a "Force diagram" where we see the work done by field. It is the next step in doing electric circuits.

Here is the electrical potential of a field. This was in the last exam so we might not have to do it, but it is a concept that we have to know.

Here we see two point charges and what the distance will be when a charge is at a certain level.

This was the biggest difference from the two classes i have taken. We did not use this contraption. This is suppose to tell you what happens when you do different things to it, By things i mean what would happen if you put a charge into it or touch it with a battery.

Here we see it at its neutral stage. We grounded it to make sure that nothing was causing it to act this way (but gravity). And we wanted to see what would happen after you added a charge or touch it with a battery.

Here we see what if we add a charge to the ball on top it will disperse the charge to the two leafs causing them to repel each other. This was what was happening to the tapes when we pulled them off the table and brought them close to each other.